Brother HL-1260 - Manual (Page 63)

IV - 15
1.22 Paper Pick-up Roller Assy, Bearing
(1) Pull out the MP paper pick-up gear 35 and the tray paper pick-up gear 35, from the paper pick-
up roller shafts.
(2) Loosen the bearing screws and pull out the paper pick-up rollers.
*When only the paper feed rollers are to be replaced, they can be replaced without removing
the paper feed unit (with the body assembled).
Paper pick-up roller shafts
Tray paper pick-up gear 35
MP paper pick-up gear 35
Bearing
Paper pick-up roller assy
Figure 4.34
Figure 4.35
Paper pick-up roller collars
Paper pick-up
roller assy
Bearing
Paper pick-up roller shafts
(3) Pull out the paper pick-up roller shafts.
(4) Remove the paper pick-up roller collars from the paper pick-up rollers assy.
Screws
Paper pick-up roller collars
Bearings
Paper pick-up roller assy
Paper pick-up roller
collars
Figure 4.36