Brother HL-1260 - Manual (Page 244)

USER’S GUIDE
2–6
Removing the Protective Parts
After checking that you have all of the correct parts, temporarily place the
printer where you can easily reach all sides. Remove the protective parts
that secure the printer against damage during transportation, as shown
below:
✒ Note
Keep all packing materials for transporting or storing the printer later.
1. Open the top cover and the upper paper cassette.
2. Remove the protective parts from inside the printer and the cassette.
3. Remove both spacers from the fixing roller.
Fig. 2-7 Removing the Protective Parts
Fig. 2-7 Removing the Protective Parts Fig. 2-8 Removing the Spacers
Protective Parts
Spacers