Brother HL-1260 - Manual (Page 66)

IV - 18
(2) Remove the 2 fixing bushes.
(3) Remove the MP tray assy.
(4) Remove the MP tray assy from the MP release plate bending its bosses.
The MP tray can be easily removed if it is slanted.
Figure 4.44
1.27 Paper Path Separation Plate, Paper Path Separation Film
(1) Remove them from the paper feed guide lower by bending them.
Paper feed guide lower
Paper path separation plate Paper path separation film
Fixing bushes
MP tray assy
Figure 4.43
Figure 4.45
MP tray assy
Boss
MP release plate
Boss