Brother HL-1260 - Manual (Page 320)

CHAPTER 4 CONTROL PANEL
4–41
FONT ID=#####
Select the ID number with the ▲ or ▼ switch and press the SET switch, so
that the printer deletes the selected font.
• Format Card
You can format the flash memory card or the HDD card to delete its
contents. Instructions are in the following menu:
FORMAT CARD
When you press the SET switch in this menu, the printer asks if you want to
delete all contents of the card:
SET-->DELETE ALL
Press the SET switch to start formatting the card.
When you want to cancel formatting, move to the following menu with the
▲ or ▼ switch and press the SET switch.
exit
ADVANCED MODE
NETWORK MODE
Display Message Network Mode
LOCK PANEL=OFF Turns on or off lock panel function.
AUTO FF=ON Turns on or off auto form feed.
FF SUPPRESS=OFF Turns on or off the form feed suppress
function.
TONER LOW=CONT Select the printer’s action when “TONER
EMPTY” is detected
■ Lock panel
If someone other than you has changed the panel switch settings and you do
not know about it, the printer may not print as you expected or it may not
print at all.