Brother HL-1260 - Manual (Page 394)

CHAPTER 7 TROUBLESHOOTING
7–7
Paper may jam in the paper cassette, inside the printer, at the rear access
cover or at the paper exit. Check the jam location and follow the
instructions below to remove the jammed paper.
After you have followed the instructions, the printer automatically resumes
printing. However, the DATA lamp may come on and the following
message may appear on the display.
07 FF PAUSE
After a paper jam has occurred, data usually remains in the printer memory.
The message prompts you to execute a form feed and print out the
remaining data. Press the SEL switch to continue.
■ Paper Jam at Paper Exit
13 JAM REAR
If paper has passed behind the rear access cover and a paper jam has
occurred at the paper exit, remove the jammed paper by pulling it slowly
from the exit as shown below:
Fig. 7-2 Paper Jam at Paper Exit