Brother HL-1260 - Manual (Page 52)

IV - 4
B
1.5 Upper Cover Assy, Rear Cover Assy
1.5.1 Upper cover assy, rear cover assy
(1) Loosen the 4 screws on the rear (the upper 2 screws secure also the upper cover ).
1.4 Font Cover Assy
(1) Remove the font cover assy by loosening the screw on the top and releasing the hooks
on the bottom and the side.
Figure 4.6
Figure 4.4
A
Screw
Hook
Font cover assy
Hook
Upper cover assy
Screws
Screws
Rear cover assy
Figure 4.5
(2) Loosen the top left screw.
(3) Remove the upper cover assy ( A ) (Refer to Figure 4.5).
(4) Remove the rear cover by pulling it rearward ( B ) (Refer to Figure 4.5).
Screw
hook
Upper cover assy
Note: The hook is released automatically
by removing the upper cover assy
in the direction of the arrow.