Brother HL-1260 - Manual (Page 148)

IV - 4
Figure 4.6
(6) Remove the main PCB assy.
Figure 4.7
Main PCB assy
7 screws
(4) Remove the switch flat cable 21P and the feed flat cable 20P.
(5) Remove the fan harness 3P, the fuser harness 4P, the Polygon harness 5P, the SCN flat
cable 6P, the DC motor harness 4P, the SCN fan harness 2P, the HV harness 16P and
the LV harness 8P.
DC motor harness 4P
Polygon harness 5P
Switch flat cable 21P
SCN flat cable 6P
Fuser harness 4P
Fan harness 3P
SCN fan harness 2P
HV harness 16P
LV harness 8P
Feed flat cable 20P