Brother HL-1260 - Manual (Page 146)

IV - 2
PRINTER DISASSEMBLING PROCEDURE
1.2 Toner Cartridge Lid
(1) Remove the toner cartridge lid from the upper cover.
1.7 DC Fan Motor
(1) Remove the DC fan motor from the DC fan motor holder by loosening the two screws.
(2) Loosen the screws securing the PCB holder and remove the entire DC fan motor holder.
(3) Remove the fan harness connector from the main PCB assy.
Figure 4.1
Open the toner
cartridge lid
Toner cartridge lid
Upper cover assy
Screw
Figure 4.2
2 screws
DC fan motor
Core
Fan connector
Holder spacer
DC fan holder