Heidolph Automatic Module Distimatic - Manual (Page 6)

Safety Instructions
10 11
Safety Instructions
The device has been constructed according to state-of-the-art technology and recognized
safety regulations. However, risks may still arise during installation, operation and
maintenance.
Please observe the safety instructions and warning notices.
The safety instructions provided in this chapter are supplemented by specific warning
notices in the following chapters. This warning notices explains exactly how you must
behave in order to protect yourself, others and objects from damage.
These operating instructions are a component of the device described here.
Please ensure the operating instructions are available at all times.
Please pass on the operating instructions to the subsequent owner.
The device may only be used under the following circumstances:
▪ The device is in full working order.
▪ The device is used according to its intended purpose.
▪ All operators of the device possess the necessary safety and risk awareness.
▪ The instructions stipulated in this instruction manual are followed.
Errors must be eradicated immediately; especially those which jeopardize safety.
Intended use
The device is suitable for the following use:
▪ Distillation
▪ Purification of media such as chemicals and liquids
▪ Processing reaction batches
▪ Solvents recycling
A suitable operating location for the device is one of the following areas:
Chemical, pharmaceutical and biological laboratories in industry and universities.
Please observe the operating instructions in order to use the device for its intended
purpose.
Unauthorized use
Any use which deviates from the device‘s intended use is considered to be improper. The
manufacturer does not accept liability for any damages resulting from non-permitted
uses. The risk is carried by the operator alone.
It is not permitted for excess pressure to be applied to the device.
Use in potentially explosive areas
Do not use the device in potentially explosive areas. The device is not protected
against explosion. There is no explosion or ATEX protection available.
Requirements to operate this unit
This product may only be operated and maintained by qualified personnel who are of
legal age and have been instructed carefully. Others may only work with the unit under
continuous supervision of an experienced person. Repairs may only be performed by
qualified electricians.
Operating company’s obligations
Only operate the device in full and proper working order.
Ensure that only qualified personnel operate the device.
Ensure that the personnel have received safety instructions in order to guarantee
responsible and safe work procedures in the laboratory.
Ensure that the device is positioned in a suitable location.
Ensure that the device is sufficiently stable.
Ensure that installation and operation of the device is only carried out in facilities
which are fitted with the appropriate laboratory equipment (e.g. with air extraction
units).
Ensure that all screw connections are securely tightened.
Depending on the medium used:
Ensure that the rotary evaporator is operated only in conjunction with an extractor
hood (at least 10-fold air change, with error monitoring), see DIN EN 14175 and DIN
12924.
General safety instructions