Heidolph Automatic Module Distimatic - Manual (Page 26)

Installation Installation
50 51
Operating panel
Connect the cabling for operating panel to connection (36).
Important: The connector must click into place completely.
36
Hei-VAP Distimatic
WARNING Hazardous materials and solvents!
There are risks posed by the leakage of hazardous substances and
solvents from locations that are not properly sealed.
Check whether all screw caps have been tightened properly at the
threads to seal them off.
Check the device components for hazardous substances and
solvents.
Ensure that the separator for the power supply is easily accessible at
all times.
Cut off PTFE tubes, which are routed through an overflow sensor and
the multiple screw connection, with a cutting knife only at an angle
of approx. 45°.
When securing PTFE tubes to a connection, only cut them vertically
with the HOLEX hose cutter.
WARNING Glass breakage!
Serious injuries due to shattering glass and glass breakage.
Check glass equipment for damage (breakage, cracks etc.).
Only use glass equipment in perfect condition.
Monitor pressure conditions in the glass attachment.
Work carefully.
If you use other cutters, there is a danger that the
affected tube circuit could leak as a result of crushing
the tube.