Heidolph Automatic Module Distimatic - Manual (Page 30)

Installation Installation
58 59
Mount 3/2 way valve on stand rod (14) and secure using screws (15). Connect vacuum tube to connection (18).
Connect vacuum tube to connections (16) and (17).
Vacuum circuit
in direction of vacuum pump
14
17
16
15
DANGER Danger to life due to dangerous electrical voltage!
Risk of serious injury.
Electrical residual energy remains in lines, equipment and devices after
shutting down the device.
Point out the power sockets to the operating
personnel. Disconnect the power plugs from the energy
source in order to establish zero potential.
Only allow qualified electricians to perform
work on the electrical supply system.
Disconnect the device from the mains supply. Regularly check
the electrical equipment (mains cables) of the device.
Replace damaged power cords. Regularly check all power
cords for damages during repair and maintenance work.
Only set up or disconnect connections when discon-
nected from the power supply.
Multiple switched socket and control box
18
Connection principle
See chapter entitled „Function and connection principle” - Hei-VAP
Distimatic”- „Connection principle of power supply”.