Heidolph Automatic Module Distimatic - Manual (Page 29)

Installation Installation
56 57
Screw cap GL32 (optional)
If you wish to use the Hei-VAP with condenser G9 without the Distimatic, then secure
the screw cap instead of the multiple screw connection to connection (8) and tighten
until hand-tight.
Remove the evaporating flask from connection (9), fill medium into the evaporating
flask and then secure the evaporating flask into place again.
Connect vacuum tubes to connections (10), (11) and (12).
Connect vacuum tube to connection (13).
8
10
12
13
11
9
Hose connector
T-type, 3/2 way valve and vacuum tube connections
Connection principle of the vacuum circuit
See chapter entitled „Function and connection principle” -
Hei-VAP Distimatic”-„Connection principle of the vacuum circuit”.