Det-Tronics UD10 DCU Emulator FlexVu Universal Display Unit - Manual (Page 22)

20 95-8656 4.2
DeVice repAir AnD return
Prior to returning devices, contact the nearest local
Detector Electronics office so that a Return Material
Identification (RMI) number can be assigned. a
written statement describing the malfunction must
accompany the returned device or component to
assist and expedite finding the root cause of the
failure
.
Pack the unit properly. Always use sufficient packing
material. Where applicable, use an antistatic bag
as protection from electrostatic discharge. The RMI
number should be clearly marked on the outside of the
box.
noTe
Inadequate packaging that ultimately causes
damage to the returned device during shipment
will result in a service charge to repair the damage
incurred during shipment.
Return all equipment transportation prepaid to the
factory in Minneapolis.
noTe
It is highly recommended that a spare be kept on
hand for field replacement to ensure continuous
protection.
orDerinG informAtion
Sensor module, transmitter module and termination
boxes (if used) must be ordered separately.
Refer to the UD10-DCU Model Matrix for ordering
details.
REPLaCEmENT PaRTS
Part Number Description
009700-001
Magnetic Tool
010535-001 Electronics Module, DCU
101197-001* Stop Plug, 3/4" NPT, AL
101197-004* Stop Plug, 3/4" NPT, SS
101197-005 Stop Plug, M25, AL, IP66
101197-003 Stop Plug, M25, SS, IP66
010816-001 Stop Plug, 20PK, 3/4" NPT, AL
010817-001 Stop Plug, 20PK, 3/4" NPT, SS
010818-001 Stop Plug, 20PK, M25, AL, IP66, ExDE
010819-001 Stop Plug, 20PK, M25, SS, IP66, ExDE
104190-001 Stop Plug, M25, AL, INMETRO
104190-002 Stop Plug, 3/4" NPT, AL, INMETRO
104190-003 Stop Plug, M25, SS, INMETRO
104190-004 Stop Plug, 3/4" NPT, SS, INMETRO
102804-001 Reducer, M25 to M20, AL
102804-003 Reducer, M25 to M20, SS
103922-001 475 Field Communicator
005003-001 Lubriplate grease, 1 oz.
*NEMA/Type 4x, IP66 rating requires addition of Teflon
tape.