Eppendorf InjectMan 4 - Manual (Page 77)

Operation
InjectMan ® 4
English (EN)
77
6.19.3 Defining the application as the start screen
1. Select the application.
2. Confirm with Enter .
3. Close the menu.
• The micromanipulator always starts with the defined application.
6.20 Service function
6.20.1 Service menu and parameters
Abb. 6-11:Service
Fig. 6-11: Service
Parameter Value Range of values
Selftest Move the motor module in all three axes and output
error message Execute
Device info Display software version Execute
Set clock Set date and time YYYY-MM-DD
00:00
Movements Show movement routes of the modules (X, Y, Z) Execute
Show errors Display last 10 error messages Execute
Demo run Save the position and move to it Execute