Eppendorf InjectMan 4 - Manual (Page 31)

Installation
InjectMan ® 4
English (EN)
31
4.8 Aligning the motor module
Centrally align the modules in order to be able to use the full movement range of the
modules.
4.8.1 Aligning the height
4.8.2 Aligning the depth
1. Undo the screw on the YZ-connector.
2. Align the Y-module on the scale of the
Z-module and tighten the screw.
1. Undo the screw on the swivel joint.
2. Align the X-module on the scale of the
Y-module and tighten the screw.