Eppendorf InjectMan 4 - Manual (Page 48)

Software
InjectMan
® 4
English (EN)
48
Application selection
• Select the application
• Store the main application
5.2.1 Application parameter
Predefined functions of the different applications.
• Pos 1 – Save the X, Y and Z values of the capillary position. Switch the position using
the joystick key.
• Pos 2 – Save the X, Y and Z values of the capillary position. Switch the position using
the joystick key.
• Activate or deactivate the Step inject function.
• Y off – Switch off the movement of the capillary in the Y-axis. Prevents moving
sideways during injection.
• Z-axis Limit – Save the downward limit for the vertical capillary movement.
• Axial – Switch on the capillary movement along the assembly bracket. Suitable for
straight capillaries.
• Reduce or increase the Limit value for the limit.
• Execute the Clean function.
5.2.2 Application – Adherent cell injection
This application is suitable for injection into adherent cells.
Abb. 5-5:Application 1 Adherent cell injection
Fig. 5-5: Application 1 Adherent cell injection
Parameter selection
• Joystick key – Inject
• Freely program the softkey
• Reduce the value for Z-axis Limit
• Set the lower limit ( Z-axis Limit )
• Increase the value for Z-axis Limit
• Execute the function