Eppendorf InjectMan 4 - Manual (Page 33)

Installation
InjectMan ® 4
English (EN)
33
4.9.2 Motor module
4.9.3 Angle head
Position Description Position [mm]
1 Z-module holder on the adapter
2 Z-module on the Z-module holder
3 YZ-connector on the Z-module
4 YZ-connector on the Y-module
5 Swivel joint on the Y-module
6 Swivel joint on the X-module
7 Angle head on the X-module
Name Position [mm] Degrees
Capillary holder
Injection angle
5 6 3 4
7
1 2