Eppendorf InjectMan 4 - Manual (Page 62)

Operation
InjectMan
® 4
English (EN)
62
6.10 Speed function
In the Speed menu you can set the speed of the working range and the speed at which
certain positions are approached or movements executed.
6.10.1 Speed menu and parameters
Abb. 6-1:Menu – Speed
Fig. 6-1: Menu – Speed
6.10.2 Setting the parameters for Speed
1. Select the desired parameter.
2. Set the value for the parameter.
3. Close the menu.
Parameter Value Range of values Increment Standard
Coarse Set the speed in μm per
second 5 – 10000 5 7500
Fine Set the speed in μm per
second 5 – 1000 5 1000
X-fine Set the speed in μm per
second 0 – 100 1 100
Injection speed Set the speed in μm per
second 5 – 10000 5 300
Step inj. speed Set the speed in μm per
second 5 – 10000 5 300
Position speed Set the speed in μm per
second 5 – 10000 5 1500
Home speed Set the speed in μm per
second 5 – 10000 5 7500
If a value of 0 is set for the X-fine parameter, then the change between the Fine
and X-fine working ranges is deactivated.