Eppendorf InjectMan 4 - Manual (Page 57)

Operation
InjectMan ® 4
English (EN)
57
6.6.2 Changing parameters in the menu
Prerequisites
• An application has been selected.
6.7 Capillary positions
To secure the capillary when moving a slide and to move it back to the same work position
you can store the positions. Depending on the application, a maximum of five positions
can be stored.
As soon as the capillary leaves a stored position, the filled circle is displayed as an empty
circle, to show that this position is now stored. If no positions are stored, the status field
will be empty.
6.7.1 Saving a position
Prerequisites
• An application has been selected.
1. Press the menu key.
2. Select the Speed menu.
3. Select the desired parameter.
4. Change the value.
1. Move the capillary to the desired
position.
2. Hold the Pos 1 softkey for approx. one
second to store the working position of
the capillary.
• An acoustic signal will sound.
• Pos 1 is marked.
• The stored position is displayed in the
status field.