Eppendorf InjectMan 4 - Manual (Page 32)

Installation
InjectMan
® 4
English (EN)
32
4.8.3 Aligning the width
4.8.4 Aligning the angle head
4.9 Entering mounting parameters
To facilitate remounting the mounting parameters can be recorded.
1. Enter the mounting parameters in the tables.
4.9.1 Microscope and adapter
1. Undo the screw on the Z-module holder.
2. Align the Z-module on the scale of the
microscope adapter and tighten the
screw.
1. Undo the screw on the angle head.
2. Align the angle head on the scale of the
X-module.
Name Type
Microscope
Adapter
Attachment side of the
motor module