Eppendorf InjectMan 4 - Manual (Page 41)

Installation
InjectMan ® 4
English (EN)
41
6. Select the Execute function to move all
motors to the middle position.
7. Select Next .
8. Insert the capillary holder into the angle
head.
9. Select Next .
10.Manually align the modules.
11.Select Next .
12.Remove the capillary holder.
13.Insert the capillary into the capillary
holder.
14.Insert the capillary holder with the
capillary into the angle head.
15.Finely adjust the position of the capillary
holder and the modules.
16.Select Next .