Eppendorf InjectMan 4 - Manual (Page 72)

Operation
InjectMan
® 4
English (EN)
72
6.16.4 Module parameters
6.17 Function function
Function allows you to reset the parameters and coordinates and to move the modules to
the middle position.
6.17.1 Function menu and parameters
Abb. 6-8:Menu – Function
Fig. 6-8: Menu – Function
Beeper Set the volume 0 – 100 % 1 50 %
Display
coordin. Set the coordinate display OFF/ON – On
Parameter Value Range of values Increment Standard
Invert X-axis Reverse the direction of
movement of the motor OFF/ON – OFF
Invert Y-axis Reverse the direction of
movement of the motor OFF/ON – OFF
Invert Z-axis Reverse the direction of
movement of the motor OFF/ON – OFF
X-axis off Switch the motor of the
movement axis on or off OFF/ON – OFF
Y-axis off Switch the motor of the
movement axis on or off OFF/ON – OFF
Z-axis off Switch the motor of the
movement axis on or off OFF/ON – OFF
Upper limit Define the upper limit EXECUTE – –
Parameter Value Range of values
Zero coordin. Reset all coordinates to zero Execute
Parameter Value Range of values Increment Standard