Eppendorf InjectMan 4 - Manual (Page 25)

Installation
InjectMan ® 4
English (EN)
25
4.3.5 Swivel joint
Abb. 4-6:Swivel joint for right side mounting
Fig. 4-6: Swivel joint for right side mounting
4.4 Mounting the motor module
The motor module can be mounted on the right-hand or left-hand side of the microscope
adapter. The following describes mounting on the right-hand side. For mounting on the
left-hand side, the swivel joint and the angle head must be modified.
1 Slider
Y-module
2 Turntable
3 Allen screws
4 Slider
X-module
5 Stop plate
6 Upper joint
7 Mounting mark
| stands for left side mounting
|| stands for right side mounting
8 Lower joint
The motor module is mounted as standard on an inverse microscope. It can also
be mounted on a universal stand. Mounting on a universal stand is described in
the corresponding manual.
5
6
7
8
2
3
4
1