Eppendorf InjectMan 4 - Manual (Page 71)

Operation
InjectMan ® 4
English (EN)
71
6.15.2 Execute the PiezoXpert function
Prerequisites
• A PiezoXpert is connected.
1. Activate Synchr. PiezoXp.
2. Set PiezoXp. speed .
3. Set PiezoXp. dist.
4. Select PiezoXp. axial .
5. Close the menu.
6. Trigger the function with Channel A on the PiezoXpert.
• The function is executed.
6.16 Installation function
This function provides settings for finely adjusting the motor module and the control
board. Parameters in the
Installation menu disable identical softkey functions.
6.16.1 Installation menu and parameters
Abb. 6-7:Menu – Installation
Fig. 6-7: Menu – Installation
6.16.2 Installation parameters
6.16.3 Control board parameters
Parameter Value Range of values Increment Standard
Side Set the mounting side LEFT/RIGHT – RIGHT
Angle Set the capillary angle in
degrees 0° – 90° 1 –
Parameter Value Range of values Increment Standard
LCD contrast Set the display contrast 65 % – 75 % 1 70 %
LCD light Set the brightness level of the
display 0 % – 100 % 1 100 %