Eppendorf InjectMan 4 - Manual (Page 76)

Operation
InjectMan
® 4
English (EN)
76
6.18.3 Executing Joystick key
Prerequisites
The My application application has been selected.
1. Select Joystick key and confirm with Enter .
2. Select the desired function and confirm with Enter .
3. Close the menu.
• The function is assigned to the joystick key.
• The selected function appears on the application screen.
6.19 Change appl. function
With this function you can define each application as the start screen or reactivate the
default screen.
6.19.1 Change appl. menu and parameters
Abb. 6-10:Menu – Change appl.
Fig. 6-10: Menu – Change appl.
6.19.2 Defining the selected application as the start screen
1. Select Start display .
2. Confirm with Execute .
3. Close the menu.
• The micromanipulator starts with the selected application.
Parameter Value Range of values
Start display Reactivate start screen to select an application Execute
Application Define the selected application as the start screen Adherent cell inj
ICSI
Dev. biology
Physiology
My application