Eppendorf InjectMan 4 - Manual (Page 75)

Operation
InjectMan ® 4
English (EN)
75
6.18.2 Executing Softkeys
1. Select the free softkey and confirm with Enter .
2. Select the desired parameter and confirm with Enter .
3. Close the menu.
• The selected parameter is assigned to the free softkey.
• The parameter appears on the application screen.
Step injection Activate the Step injection function
Limit up Change the value for Z-axis Limit upwards
Limit down Change the value for Z-axis Limit downwards
Clean Axial movement out of the working range
Z-axis only Only control of movements in the Z-axis. The control of movements in
the X and Y-axis is disabled
LCD light Set the brightness level of the display
Beeper Set the volume
Joystick off Deactivates all joystick movements
X-axis off Switch the control of the movement axis on or off
Z-axis off Switch the control of the movement axis on or off
X-axis only Only control of movements in the X-axis. The control of movements in
the Y and Z-axis is disabled
Y-axis only Only control of movements in the Y-axis. The control of movements in
the X and Z-axis is disabled
Parameter Range of values Function
Joystick key No function Deactivate the function of the joystick key
Switch position Click once to go to the next saved position
Switch fine Click once to go to the fine or x-fine working range
Joystick off Click once to switch the joystick on or off
Inject Click once to activate the function
Parameter Function