Eppendorf XplorerPlus - Manual (Page 41)

41
Eppendorf Xplorer® (plus) — Operating manual
5.15.3 Programm
Creating a new program
1. Select the
New program entry using the rocker. Up to 10 programs can be saved.
You will be prompted to name the program. You can enter a name with a maximum of six
characters.
2. Select the characters using the rocker.
3. Press the
Next softkey to switch to the next field.
4. Press the Save softkey to save the name.
5. Select the first operating mode. All operating modes except Manual Pipetting are available.
6. Press the Edit softkey.
7. Change the parameters of the mode as usual (see p. 22).
8. Press the
Save softkey.
A list with all of the previously saved program modes appears.
• Press the Next softkey to add another mode. A program can contain up to 4 modes.
• Press the Save softkey to save the program. The saved program now appears in the
Program (Prg) operating mode (see p. 39).
Changing the saved program
Requirement
To change the mode of a program, the program needs to be saved first.
1. Select a saved program from the list.
2. Press the
Select softkey.
3. Select the Edit option.
4. Press the Select softkey.
• Select the Edit mode option to change a program mode.
• Select the Insert mode option to add a mode to the program.
• Select the Delete mode option to delete a program mode.
Hint!
The program name cannot be changed later. Copy the program to change the name. You will be
prompted to enter a new name. Then delete the original program.
Hint!
Select the Copy option to create a program based on another program. You must then enter a
name for the copied program. If you only want to change the name of a program, select the Copy
option.
5
Operation