Eppendorf XplorerPlus - Manual (Page 11)

11
Eppendorf Xplorer® (plus) — Operating manual
2.2.1 Header
2.2.2 Status line
The selected operating mode is displayed here during operation. In edit mode, the name of the
parameter to be edited is displayed.
2.2.3 Main field
All parameters of the operating mode are displayed simultaneously during dispensing. A black
arrow
indicates the direction of the next piston movement.
In edit mode, the parameter to be edited is marked in red.
Some of the dispensing parameters in the main field include:
• Dispensing volume
• Speed : 8 speeds for aspiration and dispensing
• Counter : Number of conducted dispensing, optional setting in the Pip mode
Adjustment
Hint!
The adjustment can be changed in the options. The adjustment is described separately
(see p. 61). Detailed information can be found in a separate document on the CD and on our
website: www.eppendorf.com.
If you have changed the factory settings, the symbol will be displayed to the left of the header.
Additional symbols to the right indicate which adjustment is selected in the options.
1-point adjust.
Single-point adjustment by the user.
2-point adjust.
Two-point adjustment by the user.
3-point adjust.
Three-point adjustment by the user.
Glycerol 50%
Adjustment to liquid type 50 % glycerol.
Ethanol 75%
Adjustment to liquid type 75 % ethanol.
Altitude
Adjustment to an altitude other than 0 m above sea level.
epTIPS long
Adjustment to an epT.I.P.S. long.
Volume
The selected volume for the acoustic feedback can be set in the options (see p. 42).
If the volume has been set to
0 , no loudspeaker symbol is displayed.
Battery
Information on the charging capacity of the Li-polymer battery
Rechargeable battery fully charged.
Rechargeable battery partially discharged.
Rechargeable battery almost discharged. Rechargeable battery must be charged (see p. 17).
Hint!
An explanation of all dispensing parameters can be found in the "Setting parameters" chapter
(see p. 22).
2
Product description