Eppendorf XplorerPlus - Manual (Page 39)

39
Eppendorf Xplorer® (plus) — Operating manual
5.14 Program (Prg dial setting)
Previously stored programs can be executed in the Program (Prg) operating mode. Programs
consist of 1-4 combined operating modes in a defined sequence. Up to 10 different programs can
be created (see Editing (Edit dial setting) on p. 39).
Requirement
• Pipette switched on (see p. 19)
• Program (Prg) operating mode selected (see p. 33)
• Program created (see p. 39)
• Pipette tip attached (see p. 24)
1. Select the program using the rocker.
2. Press the
Select softkey.
The execution of the program depends on the operating modes used.
5.15 Editing (Edit dial setting)
Programs and pipettings with fixed volumes can be created and edited in the Edit mode. Stored
programs can be executed in the Program (Prg) mode. Stored programs with fixed volumes can
be stored in the Fixed volumes (Fix) mode. If necessary, programs and pipettings with fixed
volumes can be password protected using the Pswrd. protection option.
Requirement
• Pipette switched on (see p. 19)
• Edit operating mode selected (see p. 33)
1. Selected the required option using the rocker.
2. Press the
Select softkey.
The next steps are described in the following subchapters.
Only available for the Xplorer plus pipette
Hint!
The blow-out ( Blow ) must always be executed In the "Pipetting" mode.
Only available for the Xplorer plus pipette
5
Operation