Eppendorf XplorerPlus - Manual (Page 10)

Eppendorf Xplorer® (plus) — Operating manual
10
2.1.2 Multi-channel
2.2 Display
The brightness of the display can be changed in the options (see p. 42). The display dims during
usage intervals and switches off after a prolonged usage interval. Move the Xplorer pipette to
switch the display back on.
A description of the upper part can be found in
the main illustration of the single-channel pipette
(see p. 9).
1 Lever
The lever is used to release the multi-channel
lower part.
2 Multi-channel lower part
The multi-channel lower part is autoclavable.
The multi-channel lower part is freely rotatable. It
is not detached when rotated. The outer channels
are marked with the numbers 1 and 8 (or 12).
The multi-channel version has a piston for each
channel so that less than 8 or 12 tips can also be
mounted.
You can open the multi-channel lower part in
order to exchange or remove individual channels.
3 Latches, right and left
Unlock the cover plate (6) and internal ejector rail.
The 1 200 μL multi-channel lower part can be
opened with a pin (see p. 58).
4 Spring-loaded tip cones for 10 μL, 100 μL and
300 μL
The spring loading action optimizes the force
required for attaching and ejecting tips.
5 Pipette tips
We recommend using epT.I.P.S.
6 Cover plate for 10 μL, 100 μL and 300 μL
Removable cover plate with internal ejector rail.
The cover plate is opposite the side with the
lever (1).
1
2
3
4
5
6
1 Header 2 Status line
3 Main field 4 Footer
1
2
4
3
2
Product description