4 installation, 1 power supply assembly, 2 connect rechargeable lithium-polymer battery – Eppendorf XplorerPlus User Manual
Page 16: Installation 4.1, Power supply assembly, Connect rechargeable lithium-polymer battery, Eppendorf xplorer® (plus) — operating manual, Installation
Eppendorf Xplorer® (plus) — Operating manual
16
4
Installation
4
Installation
4.1
Power supply assembly
Fit the power plug adapter required for your power supply into the opening of the power
supply. In the event of any doubt which power plug adapter should be used for the power
supply unit, you should ask an electrician for advice.
4.2
Connect rechargeable lithium-polymer battery
The lithium polymer battery is already inserted in the battery compartment upon delivery.
1 Power plug adapters
a EU
b United Kingdom
c USA
d Australia
2 Power supply
3 Charging plug
I.T
.E. PO
WER SUPPL
Y
MODEL NO:
INPUT
: 100–240 V 50/60 Hz 0.5 A
OUTPUT
: 5 V = 1.0 A
Appr
o
v
al no.
U
L
G
S
IIIIIIIIIIIIIIIIIIII
IIIIIIIIIIIIIIIIIIII
C
N 1388 LEI-4 MADE IN C
HIN
A
IIIIIII
d
1
c
b
a
2
3
1. Open the rechargeable battery compartment
cover.
2. Connect the plug of the rechargeable lithium
polymer battery to the connector socket.
3. Close the rechargeable battery compartment
cover.
On the Xplorer plus pipette, you will then be
prompted to set the date and time
(see p. 19).
4
Installation