5 operation, 1 switching the pipette on and off, 2 setting the date and time – Eppendorf XplorerPlus User Manual
Page 19: Operation 5.1, Switching the pipette on and off, Setting the date and time, Eppendorf xplorer® (plus) — operating manual, Operation
19
Eppendorf Xplorer® (plus) — Operating manual
5
Operation
5
Operation
5.1
Switching the pipette on and off
Power on
Power off
5.2
Setting the
Date
and
Time
Set the
Date
and
Time
parameters during the initial start-up.
Requirement
•
Battery connected (see p. 16).
•
Battery charged (see p. 17).
•
Pipette switched on (see p. 19).
1. Select
Date
or
Time
using the rocker.
2. Press the
Select
softkey.
3. Change the value using the rocker.
4. Press the
Next
softkey to change the field.
5. Press the
End
softkey to end the entry.
6. Change the second parameter in the same way.
7. Press the
End
softkey to end the entry.
Hint!
When not in use, the switched on pipette automatically switches to the standby mode after a
period of time. The pipette automatically switches back on when it is moved.
Switch on the ON switch to turn on the pipette.
On
Switch off the ON switch to turn off the pipette.
Only available for the Xplorer plus pipettes
On
Hint!
To change the date and time at a later time, change the
Date and Time
parameter in the options
5
Operation