Apple MainStage 2 - Manual (Page 98)

2 On the channel strip, click one of the Send slots and choose a bus from the menu.
Choose a bus from one
of the Send slots.
3 Drag the Send knob next to the slot to set the amount of the signal sent to the aux.
To add a concert-wide effect to an aux
1 In the Patch List, select the concert icon.
The auxes in the concert appear in the Channel Strips area along with the concert-level
channel strips.
2 On an aux, click one of the Insert slots and choose an effect from the menu.
After you add an effect to an aux, you can edit the effect as you would any channel strip
effect, by double-clicking it to open the plug-in window, and then adjusting parameters
in the plug-in window. You can add multiple effects to an aux, and adjust the level and
pan of the aux using the channel strip controls on the aux.
98 Chapter 6 Working with Concerts