Apple MainStage 2 - Manual (Page 62)

7 On your keyboard controller, press the key you want to set as the highest key in the key
range.
8 Click the Learn button again to turn off Learn mode for the High Key.
When you play the patch, you hear the channel strip when you play notes inside the key
range. When you play notes outside the key range, no sound is generated from the
channel strip.
To define a key range using the value sliders
1 In the Channel Strips area, select the channel strip.
2 In the Channel Strip Inspector, click the Layer Editor tab.
3 Change the value in the Low Key value slider.
You can click the value and drag vertically, click the up arrow or down arrow, or
double-click the value and type a new value.
Set the high key and
low key using these
value sliders.
4 Change the value in the High Key value slider.
You can click the value and drag vertically, click the up arrow or down arrow, or
double-click the value and type a new value.
Setting Floating Split Points
When a key range has a floating split point, the notes that define the boundaries of the
key range ends change depending on the keys you play as you approach the boundary
of the key range. You set floating split points in the Layer Editor tab of the Channel Strip
Inspector.
62 Chapter 5 Working in Edit Mode