Apple MainStage 2 - Manual (Page 36)

Changing a Channel Strip Setting
You can quickly change the instrument, effects, and other parameters for a channel strip
by selecting a new setting from the Channel Strip Library. The browser shows available
settings for the currently selected channel strip.
To select a new channel strip setting
1 Make sure that the channel strip you want to change is selected.
The selected channel strip is highlighted.
2 In the Channel Strip Inspector, click the Channel Strip Library tab.
Available channel strip settings appear in the Channel Strip Library. Logic Studio content
appears as a series of folders with different instrument and usage categories. If you have
GarageBand or have one or more Jam Pack collections installed on your computer, those
settings appear below the Logic Studio settings.
3 Click a category from the column on the left, then click subcategories from the columns
on the right until you see the settings you want.
Click a category in this
column to see the
available choices. Click the channel strip
setting you want to use from
the columns to the right.
You can also search for channel strip settings by name and perform other functions using
the Channel Strip Library. For more information about the Channel Strip Inspector, see
Choosing Channel Strip Settings .
36 Chapter 4 Getting Started with MainStage