B&K CT600.1 - Manual (Page 72)

B K
&
S B
IMPLY ETTER!
66
Main Menu Sub Menu
To re-name a preset, use the SEL or Enter key to
select the name, then left/right arrows for position and
up/down arrows to pick a character. Up to 13 characters
are available for each preset name. In addition the fol-
lowing keymap may be used to to aide in the naming
process: 1=ABC, 2=DEF, etc.
Press SEL or Enter to save the new name.
Audio/Video System Setup
Navigate with the arrow keys (or the number keys on the
remote) then use the SEL or Enter buttons to jump to the
new sub-menu. Once in the sub menu, a tap of menu
button will return you to this menu.
Inputs Sub-Menu
Select one of the nine shared inputs or the 6 dedicated
zone inputs. Then do the following steps:
1. Name the input.
2. If needed adjust the level to match other inputs.
3. Select Stereo or Mono
4. Select Yes or No for video. If you select NO, the
CT Receiver will remain on the last used video source
when that input is selected.
Naming an Input
Select Line one (Name) with the Up and Down keys,
Press the Right arrow key to show the blinking cursor.
Then select which character position you want using the
Left and Right keys. Use the Up and Down keys to
change the character. You may also use the keymap to
aide the naming process:1=ABC, 2=DEF, etc....Once the
name is correct, use the SEL or Enter button to save it.