Power-on preferences - tab 5 – B&K CT600.1 User Manual

Page 50

B K

IMPLY

ETTER!

Power-On Preferences - Tab 5

Power-On preferences describe a specific state of a zone or group of zones will power on every time the
zone or group is powered on.

1. Select Code Set:

All of the code-sets that were programmed previously appear on this list with the title given for that zone. The
settings adjust what will happen when each code-set is powered on.

2. Select Power On Setting:

Set the Power On Preferences for the Audio Input, Video Input, Volume, Bass, Treble, Equalization, AM
Frequency, FM Frequency and/or FM Stereo mode.

3. Last Used:

When powered on, the zone (or group of zones) will return to its’ last used state. For example, if the audio
input was set to In 1 when powered off, the zone will power on with the audio from In 1.

4. Power On Preference:

The zone (or group of zones) for the selected code-set will power on to the selected setting. Specific vol-
umes or radio stations, bass, treble and equalization may be chosen as power-on preferences.