Setup using the on screen di, Setup using the on screen display – B&K CT600.1 User Manual
Page 67
B K
&
S
B
IMPLY
ETTER!
61
Setup Using the On Screen Display
Setup Using the On Screen Display
It is possible to completely program the CT Receiver via the on-screen menus or the front panel dis-
play. However, it is not nearly as fast and straightforward as using a PC and BK Suite. Nevertheless, it
is often convenient to touch up one or two parameters of the system using the on-screen or front
panel menus. All on screen setup on a CT Receiver must be done through the zone A video output
run to a monitor accessed by remote control. Remote control access to the on screen menu is limited
to zone A only.
The on screen menu may not be accessed by any zone other than zone A.
See also other documents in the category B&K Receivers and Amplifiers:
- ST1400M (16 pages)
- AVR 707/705 (12 pages)
- AVR305 (84 pages)
- CT610 (12 pages)
- FIVE OR SEVEN CHANNEL 125.7 S2 (12 pages)
- CT300.3 (2 pages)
- 5 S2 (20 pages)
- AVR202 Series (52 pages)
- AVR517 (64 pages)
- AVR315 (88 pages)
- 200.1 S2 (12 pages)
- AV2500 Series II (20 pages)
- 7250 (16 pages)
- ST140M (16 pages)
- AV5000 (16 pages)
- PT 3 series II (36 pages)
- EX4420M (15 pages)
- ST1400 (14 pages)
- CT310 (88 pages)
- 4420M (16 pages)
- AVR505 (88 pages)
- TX4430 (15 pages)
- 200.5 S2 (12 pages)
- Reference 70 HT 70 (12 pages)
- VMR-6.5.4 (12 pages)
- P/N13445 (16 pages)
- AVR507 SERIES 2 (64 pages)
- AVR212 (88 pages)
- AV5125 (16 pages)
- AV6125 (16 pages)
- ST1200 Series (20 pages)
- 3220 (16 pages)
- REF 70 (2 pages)
- ST3140 (16 pages)
- Reference 4430 (16 pages)
- 220M (16 pages)
- AVR202 Plus (84 pages)
- ST260 (20 pages)
- AVR202 Series (60 pages)
- AVR707 (2 pages)
- 2220 (16 pages)
- series II (16 pages)
- AV2600 (16 pages)
- ST2140 (16 pages)