Adding an hd6 – B&K CT600.1 User Manual
Page 33
Adding an HD6
B K
&
S
B
IMPLY
ETTER!
27
Adding an HD6
The HD6 is designed to operate seamlessly with a CT Receiver. Simply connect the HD6’s CT RS-232 LINK
connector to the CT’s RS-232 I/O connector using a straight through CAT-5 cable. At power up, the HD6 will
learn all of it’s settings from the CT Receiver. No additional HD6 setup is required. The LINKING process
takes about 15 seconds.
When connected in this manner, the HD6 will stay in sync with the CT Receiver for keypad and IR messages.
Dedicated input and page/event settings that depend on video detection will continue to work as expected
even though the video is connected to the HD6 instead of the CT.
See also other documents in the category B&K Receivers and Amplifiers:
- ST1400M (16 pages)
- AVR 707/705 (12 pages)
- AVR305 (84 pages)
- CT610 (12 pages)
- FIVE OR SEVEN CHANNEL 125.7 S2 (12 pages)
- CT300.3 (2 pages)
- 5 S2 (20 pages)
- AVR202 Series (52 pages)
- AVR517 (64 pages)
- AVR315 (88 pages)
- 200.1 S2 (12 pages)
- AV2500 Series II (20 pages)
- 7250 (16 pages)
- ST140M (16 pages)
- AV5000 (16 pages)
- PT 3 series II (36 pages)
- EX4420M (15 pages)
- ST1400 (14 pages)
- CT310 (88 pages)
- 4420M (16 pages)
- AVR505 (88 pages)
- TX4430 (15 pages)
- 200.5 S2 (12 pages)
- Reference 70 HT 70 (12 pages)
- VMR-6.5.4 (12 pages)
- P/N13445 (16 pages)
- AVR507 SERIES 2 (64 pages)
- AVR212 (88 pages)
- AV5125 (16 pages)
- AV6125 (16 pages)
- ST1200 Series (20 pages)
- 3220 (16 pages)
- REF 70 (2 pages)
- ST3140 (16 pages)
- Reference 4430 (16 pages)
- 220M (16 pages)
- AVR202 Plus (84 pages)
- ST260 (20 pages)
- AVR202 Series (60 pages)
- AVR707 (2 pages)
- 2220 (16 pages)
- series II (16 pages)
- AV2600 (16 pages)
- ST2140 (16 pages)