B&K CT600.1 - Manual (Page 68)

B K
&
S B
IMPLY ETTER!
62
On Screen Menu Operation with the MZ-128
Using a Remote Control
The on screen display may be navigated by use of the MZ-128 remote controller or any remote may be used
once it is set to the zone A Code-Set. Zone A is default code set to 0-1-1.
Using The Remote Control and On-Screen Menus
The MAIN MENU appears with the first
sub menu title highlighted in red.
The MENU button always backs up one
level at a time. Pressing the MENU button
when in the MAIN MENU screen will exit
the menu system.
At any time, the menu’s may be exited
completely by pressing the EXIT button.
(note, when changing settings, pressing
exit may not completely allow an adjust-
ment, it is recommended to press Menu
until the menu system is completely
exited)
Tapping the MENU button on the remote
control brings up the On-Screen MAIN
MENU.
Use the Up and Down arrows to navigate
to the sub menu you want and press the
center SEL/ENTER button.
Use the Left and Right arrows to adjust the
selected item.
In the example displayed, the Audio Input
of Zone A (under Zone Operation) has
been selected, using the left and right
arrows, adjust the audio input to whatever
setting is desired.