B&K CT600.1 - Manual (Page 42)

B K
&
S B
IMPLY ETTER!
36
Hardware Zone Settings - Tab 1
1. Since a CT600.3/600.1 has six hard-
ware zones, BK Suite will display a zone
button corresponding to each of the six
zones. (If you are programming a
CT300.3, three zone buttons appear).
Select the zone you wish to adjust the set-
tings of.
2. You may set Zone A to stereo or mono
as required. When stereo is selected, the
form will appear as shown to the left.
If mono is chosen, the Zone A form will
change its appearance to the mono ver-
sion as shown to the left.
The form displays new choices for the split
mono zone. The right or left side may con-
figured fixed or variable or may have vol-
ume limits set. The changes made in the
Hardware Zone setting Tab affect amp
channels only.
1
2
2