Basic tab, Layout tab, Finish tab – Konica Minolta bizhub C650 User Manual
Page 98: Basic tab -2 layout tab -2 finish tab -2
C650
5-2
Setting up the PCL driver (Windows)
5
Basic tab
Layout tab
Finish tab
Item
Function
Original Orientation
Specifies the orientation of the original document.
Original Size
Specifies the size of the original document.
Paper Size
Specifies the output paper size. Automatically enlarges or reduces when the Original
Size setting is changed.
Zoom
Specifies the enlargement and reduction ratio.
Paper Tray
Selects the paper tray for printing.
Paper Type
Selects the paper type for printing.
Output Method
For non-conventional printing, selects special output methods such as "Secure Print"
or "Save in User Box".
[User Settings]
Specifies the ID and password, or the file name and box number when performing "Se-
cure Print" or "Save in User Box".
[Authentication/Account
Track]
Specifies the user name and password when performing user authentication, and the
department name and password when performing account track on this machine.
Copies
Specifies the number of copies to print.
Collate
Specifies whether to print multiple copies in sets.
Offset
When printing multiple copies, shifts the output position of each set.
Paper Settings for Each
Tray
Specifies the paper type for each paper tray.
Item
Function
Combination
Prints multiple pages on one page, or prints one sheet of an original document divided
on multiple pages. Details can be specified by clicking the [Combination Details] but-
ton.
Rotate 180
Prints the image rotated 180°.
Skip Blank Pages
Does not print blank pages in the data.
Chapters
Specifies the page to be printed on the front side.
Print Type
Specifies duplex printing and booklet printing.
Binding Position
Specifies the binding position.
Binding Margin
Specifies the binding margin. Click the [Binding Margin Settings] button to specify the
margin values.
Image Shift
Prints by shifting the entire print image. Click the [Image Shift Settings] button to spec-
ify the image shift values.
Item
Function
Staple
Specifies stapling.
Center Staple and Fold
Specifies to saddle stitch a printed document.
Punch
Specifies hole punching.
Fold
Specifies folding.
Output Tray
Specifies the tray where to output the printed pages.
Paper Arrangement
Specifies the method for adjusting the binding position.