Konica Minolta bizhub C650 - Manual (Page 164)

C650 6-33
Setting up the PostScript driver (Windows) 6
6.10 Specifying the Settings tab settings
Specifying the default settings
You can change the default settings for displaying the confirmation messages or the dialog box for entering
the authentication settings.
1
For Windows 2000, click the [Start] button, point to "Settings", and then click "Printers".
For Windows XP/Server 2003, click the [Start] button, and then click "Printers and Faxes".
For Windows Vista, click the [Start] button, and then click "Control panel", "Hardware and Sound", and
"Printers".
– If "Printers and Faxes" does not appear in the Start menu in Windows XP/Server 2003, open the
Control Panel from the Start menu, select "Printers and Other Hardware", and then select "Printers
and Faxes".
– For Windows Vista, if the control panel is in the classic view, double-click "Printers".
2
Right-click the icon of the installed printer, and then click "Properties".
3
Click the Settings tab.
4
Specify settings for the following:
– Display Constraint Message: Specifies whether to display a message when functions that cannot
be specified at the same time were enabled from the printer driver.
– Display paper set in Print Server Properties: Specifies whether to use the paper that was added in
[Server Properties] of the printer folder.
– Verify Authentication settings before printing: Specifies whether to verify the authentication settings
for this machine before printing. A message appears if the results verified are not compatible.
– Popup Authentication Dialog when printing: Displays the User Authentication/Account Track dialog
box when a print job is specified to enter a user name or a department name.
2
Note
If custom paper sizes are used regularly, add the paper size to [Server Properties] of the printer folder.
If the "Display paper set in Print Server Properties" check box is selected, the paper size can be
selected from the paper size list.