Konica Minolta bizhub C650 - Manual (Page 40)

C650 2-11
Installing the printer driver 2
This completes the printer driver installation.
Installing the printer driver using Plug and Play
For Windows 2000
1
After using a USB cable to connect this machine to a computer, turn on the computer.
– Do not disconnect or connect the cable while the computer is starting up.
2
Insert the printer driver CD-ROM into the computer’s CD-ROM drive.
3
Turn the main power of this machine on.
The Found New Hardware Wizard starts up.
4
Select "Search for a suitable driver for my device (recommended)", and then click the [Next] button.
5
Select "Specify location", and then click the [Next] button.
6
Specify the desired folder on the CD-ROM that contains the printer driver, and then click the [OK]
button.
– Select the specified folder according to the printer driver to be used, the operating system, and the
language.
– Printer drivers that can be selected: Windows 2000: PCL driver, PS driver, Fax driver
7
Click the [OK] button, and then follow the on-screen instructions.
8
Click the [Finish] button.
9
When installation is complete, make sure that the icon of the installed printer appears in the Printers
window.
10
Remove the CD-ROM from the CD-ROM drive.
This completes the printer driver installation.
For Windows XP/Server 2003
1
After using a USB cable to connect this machine to a computer, turn the computer on.
– Do not disconnect or connect the cable while the computer is starting up.
2
Insert the printer driver CD-ROM into the computer’s CD-ROM drive.
3
Turn the main power of this machine on.
– If the Add New Hardware Wizard does not start up, turn the main power off, then on again.
– When turning the power off, then on again, wait at least 10 seconds before turning the power on
again; otherwise, this machine may not function properly.
The Found New Hardware Wizard dialog box appears.
4
Select "Install from a list or specific location (Advanced)", and then click the [Next] button.
– If the Windows connect to Windows Update dialog box appears, select "NO".
5
From "Search for the best driver in these locations", select "Include this location in the search", and
then click the [Browse] button.
6
Specify the desired folder on the CD-ROM that contains the printer driver, and then click the [OK]
button.
– Select the specified folder according to the printer driver to be used, the operating system, and the
language.
– Printer drivers that can be selected: Windows XP/Server 2003: PCL driver, PS driver, Fax driver
7
Click the [Next] button, and then follow the on-screen instructions.
– When the Digital Signature dialog box appears, click the [Continue] button.