For mac os 9.2, For mac os 9.2 -17 – Konica Minolta bizhub C650 User Manual
Page 46
C650
2-17
Installing the printer driver
2
6
Select "KONICA MINOLTA C650 PS", and then click the [Add] button.
The selected printer is registered in the printer list.
For Mac OS 9.2
After connecting this machine, it can be used as a printer by selecting "PostScript printer" under "Chooser"
and by specifying the printer description (PPD) File.
First, copy the printer description (PPD) file onto the Macintosh computer.
1
Insert the printer driver CD-ROM into the computer’s CD-ROM drive.
2
Open the desired folder on the CD-ROM that contains the printer driver. Select the specified folder
according to the printer driver to be used, the operating system, and the language.
3
Select PPD file "KONICAMINOLTAC650UVxxx.ppd", and then copy it into the "Printer Descriptions"
folder in "System Folder" – "Extensions" of "Hard Disk".
Next, select a printer.
The printer driver can use a standard Macintosh LaserWriter.
4
On the Apple menu, click "Chooser".
5
Make sure that "AppleTalk" is set to "Active", and then click the [LaserWriter] icon.
6
From the "Select a PostScript Printer" list, click the applicable printer for the printing system, and then
click the [Create] button.
–
If a different PPD file has already been selected, click the [Setup] button in step 6, and then click the
[Select PPD] button from the screen that is already displayed.
The PostScript printer description (PPD) file selection screen appears.
7
Select the applicable PPD file, and then click the [Select] button or [Open] button.
The setting screen for adding options appears.