Konica Minolta bizhub C650 - Manual (Page 266)

C650 10-22
Various settings 10
4
Press the [C] (clear) key to erase the value, and then use the keypad to type in the default number of
lines (between 5 and 128).
– If a value outside of the allowable range is specified, the message "Input Error" appears. Type in a
value within the allowable range.
5
Touch [OK].
The number of lines per page is set.
CR/LF Mapping
You can specify the data substitution method when printing text data. (Default setting: OFF)
[Mode 1]: Substitutes CR for CR-LF.
[Mode 2]: Substitutes LF for CR-LF.
[Mode 3]: Substitutes to CR-LF.
[OFF]: Does not perform substitution.
!
Detail
For details on displaying the User Settings screen, refer to "To display the User Settings screen" on
page 10-1.
1
In the User Settings screen, touch [5 Printer Settings].
2
Touch [3 PCL Settings].
3
Touch [5 CR/LF Mapping].