Konica Minolta bizhub C650 - Manual (Page 138)

C650 6-7
Setting up the PostScript driver (Windows) 6
– Unit: Selects the measurement unit that specifies the size.
3
Click the [OK] button.
Selecting the paper tray
You can specify the paper you want to use for printing by selecting the paper tray that contains the loaded
paper.
1
Click the Basic tab.
2
From the "Paper Tray" drop-down list, select the desired paper tray.
2
Note
If "Auto" is specified as the paper tray, you can select the paper type. If the paper tray setting is
changed to a setting other than "Auto", the paper type is fixed to its preregistered setting. Specify a
paper type by clicking the [Paper Settings for Each Tray] button. For details, refer to "Specifying the
paper type for a paper tray" on page 6-7.
Specifying the paper type for a paper tray
You can specify the paper type for a paper tray.
1
Click the Basic tab.
2
Click the [Paper Settings for Each Tray] button.
The Paper Settings for Each Tray dialog box appears.
3
From "Paper Type Settings", select the desired paper tray, and then select the paper type to be
specified from the "Paper Type" drop-down list.
4
Click the [OK] button.