Konica Minolta bizhub C650 - Manual (Page 162)

C650 6-31
Setting up the PostScript driver (Windows) 6
2
Note
Click the [Acquire Device Information] button to communicate with this machine and read the status of
the settings specified on this machine. You cannot use this function if you are not connected to or able
to communicate with this machine. The connection can be specified by clicking the [Acquire Settings]
button. In addition, when use the [Acquire Device Information] function, in the Administrator Settings of
the machine, select [System Connection] - [Open API Settings] - [Authentication], and then select
"OFF". For details, refer to "Authentication Setting for the OpenAPI Settings" on page 10-38.
!
Detail
For the procedure for specifying "Encrypt. Passphrase" to be defined by the user, refer to "Specifying
a user-defined encryption passphrase" on page 9-30.
Specifying the paper tray
You can register the paper size, paper orientation, and paper type for the paper that is loaded in a paper tray.
2
Reminder
If the paper loaded in this machine and the paper specified from the printer driver are different, printing
cannot be performed correctly. Be sure to make the proper settings.
1
Click the Configure tab.
2
Click the [Paper Tray Settings] button.
The Paper Tray Settings dialog box appears.
3
Select the desired tray in "Paper Tray Information", and then specify the paper size, paper orientation,
and paper type.
4
Click the [OK] button.
2
Note
The paper type for a paper tray can also be specified from the Basic tab. For details, refer to "Specifying
the Basic tab settings" on page 6-6.
Specify "Duplex Side 2" to print on the back side of a page.