Konica Minolta bizhub C650 - Manual (Page 50)

C650 3-3
Setting up network printing 3
3.2 Setting the IP address for this machine
Use this machine’s control panel to assign an IP address to this machine.
2
Reminder
When specifying network settings, follow the instructions of the network administrator.
1
Press the [Utility/Counter] key in this machine’s control panel, touch [Administrator Settings], and then
enter the administrator password.
– The administrator password is required to enter Administrator mode. Ask the administrator of this
machine for the administrator password.
2
Touch [Network Settings], then [TCP/IP Settings].
3
Touch [ON].
4
Touch [IP Settings].
5
Touch [Manual Input] under "IP Application Method".
6
Specify settings for the following:
– IP Address: Specify the IP address of this machine.
– Subnet Mask: Specify the subnet mask for the network to which you are connecting.
– Default Gateway: Specify the default gateway address for the network to which you are connecting.
7
Touch [OK].
8
To apply the settings, restart this machine (turn the main power off, then on again).
Turn this machine back on to apply the IP address.