Print/fax output setting, Print/fax output setting -29 – Konica Minolta bizhub C650 User Manual
Page 273
C650
10-29
Various settings
10
–
For details on setting or changing the password, refer to the User’s Guide [Copy Operations].
The Administrator Settings screen appears.
2
Note
To quit specifying the Utility mode settings, press the [Utility/Counter] key. Otherwise, cancel the Utility
mode by touching [Close] in each screen until the screen for the Copy, Fax/Scan, or Box mode appears.
To return to the Utility screen, touch [Close] until the desired screen appears. You can also touch the
menus in the left panel to return to the Utility screen.
Print/Fax Output Setting
You can specify whether to print data after it is received or to print it simultaneously as it is being received.
You can specify this function for the printer and for faxing. (Default settings: Printer - Page Print; Fax - Batch
Print)
!
Detail
For details on displaying the Administrator Settings screen, refer to "To display the Administrator
Settings screen" on page 10-28.
1
In the Administrator Settings screen, touch [1 System Settings].
2
In the Systems Settings screen, touch [2 Output Settings].
3
In the Output Settings screen, touch [1 Print/Fax Output Settings].
–
If the "Administrator Security Level" parameter is set to "Level 2", users can also specify this setting.
Touch [User Settings], [System Settings], [Output Settings], then [Print/Fax Output Settings] to
display the Print/Fax Output Settings screen.
–
For details on the "Administrator Security Level" refer to the User’s Guide [Copy Operations].
The Print/Fax Output Settings screen appears.